Close this search box.

270 XT MAX Awning Mk2

$1,850.00 Exc. Freight & Taxes

The 270 XT MAX Awning Mk2 sets a new standard for a free standing shade awning with massive shade coverage (+/-12m2 / 129ft2), great wind resistance and shares the same strength and durability as the famous 270 XT Awning.

The 270 XT MAX Awning Mk2 is 2.3m (7’6″) long when packed away, weighs only 33.5Kg (74lbs) and can set up or packed away by one person in under 60 seconds.

The awning is available in either a Left Hand Side (driver’s side in USA)  or Right Hand Side (passenger side in USA) configuration, please select which version you require from the drop down menu below.

The 270 XT MAX Awning Mk2 requires a fitment bracket attached to the stainless steel head stock at each end of the awning frame no more than 200mm (7 ⁷/₈inch) from each end, there are 3 Heavy Duty L brackets supplied with the awning.  The awning is not suitable to be fitted to a roof rack shorter than 1.9m (75″) in length or to load bars where the width from front to rear is less than 1.9m (75″). We recommend having a third bracket positioned in the middle of the awning.

To mount the awning to one of our rooftop tents you will need an Awning To Tent bracket which are sold separately.

SKU N/A Category Tag


270 XT MAX Awning Mk2 – Overview

The combination of forward and rear folding arms means the 270 XT MAX Awning Mk2 provides an incredible amount of shade (+/-12m2 / 129ft2) around your 4WD for you to set up your camp kitchen, swags or just a shaded seating/chill out area. As you can see from the video the awning is an easy set up by one person in about 60 seconds and the pack down is just as simple.  The 270 XT MAX Awning Mk2 has a heavy duty stainless steel hinge at the rear and front section of the frame with arms that wrap around the rear of your vehicle as well as folding forward to be parallel with the side of the vehicle.

Around the inside edge of the awning is a 50mm (2″) thick triple stitched velcro strip which can be used to attach the optional 270 XT MAX Awning Wall Kit to fully enclose the area beneath the awning, or if you only want a wind break or a little privacy then check out our  solid canvas universal single walls.

The canvas on the 270 XT MAX Awning is a 315gsm (11.3oz) poly-cotton rip-stop canvas in The Bush Company’s traditional olive green colour that is mould and mildew resistant. There is only one seam in the whole canvas section (not including the edges) and the canvas is pre-treated during manufacture for water resistance, but over time if the stitched areas show signs of water ingress this is easily treated with a canvas aqua proof product to seal the stitch holes.  Where the canvas is attached to the ends of the trussed awning arms there is additional triple reinforcement to eliminate chafing, while the front and rear arms slide into a triple stitched canvas sleeve.

The 270 XT MAX Awning Mk2 bag is 460gsm (16.2oz) poly-cotton rip-stop canvas with YKK Zippers.  In contrast to PVC covers, the canvas allows the awning to breath while keeping it dust/dirt free and moisture is able to wick out through the zipper reducing the risk of mould or mildew.  The rip-stop material on the bag also reduces the risk of large running tears in the bag as a result of contact with tree branches, and the front and rear sections of the bag have a double layer of canvas providing extra protection.

The frame of the awning is made from an extruded aluminium alloy composite which has been specifically designed to provide the elasticity, strength and durability we require.  The brackets for the hinges are constructed from stainless steel providing huge strength.  The main truss arms on the awning have been gusseted for additional strength, which enables the awning to be fully free standing without any poles in even strong wind conditions.

We do not supply poles for the awning as it does not need them, but we do supply guy ropes and pegs.  It is recommended that the front and rear arms are pegged down when the awning is deployed to prevent excessive upward movement as these are reinforced but not gusseted.  The guy ropes attach to the 1 tonne webbing straps that are attached to the canvas at the ends of the arms and midway along each canvas section.

In conjunction with the natural rake of the awning, the guy ropes should be used to prevent pooling of water on the canvas and to guide water runoff in preferred places. We do not recommend leaving the awning up unattended during snowfall due to risk of canvas stretching due to excessive weight.

Fitting the 270 XT MAX Awning Mk2

The 270 XT MAX Awning Mk2 frame requires a fitment bracket attached to the stainless steel sections no more than 200mm (7 ⁷/₈inch) from each end, there are 3 Heavy Duty L brackets supplied with the awning.  The awning is not suitable to be fitted to a roof rack shorter than 1.9m (75″) in length or to load bars where the width from front to rear is less than 1.9m (75″). We recommend having a third bracket positioned in the middle of the awning.

To mount the awning to one of our rooftop tents you will need an Awning To Tent bracket which is sold separately.


Using & Caring For Your Awning

Before Use:

We recommend that new awnings are thoroughly wet down before first use. This will ensure that your awning performs well in wet weather by allowing the poly/cotton corespun thread and canvas to swell ensuring the take up of any potential leaks in the stitching.

Deploying & Packing Away:

  • When unzipping the awning, make sure the zippers are right to the top of the bag at each end and that the bottom corners of the bag are not caught on the awning frame.
  • When deploying your awning if the canvas seems excessively tight, STOP and check that the canvas is not caught on the hinge mechanism and that it has not slid too far one way in the sail-track on the awning frame.
  • When packing the awning away, ensure that the canvas is not pinched between the awning arms especially close to the hinge mechanism.
  • When you roll up your awning canvas please make sure that it is as tight as possible and that Velcro straps are secure, this helps to minimise movement during travel.  Incorrectly packing away the awning could result in vibration and rubbing of the awning arms resulting in abrasion of the canvas.
  • It is advised, especially after prolonged trips, to periodically check the mounting bolts securing the brackets to your vehicle and the awning to the brackets, as well as the bolts securing the head stocks of the awning to the frame.

Cleaning Canvas & Bag:

  • Do not use soap or detergents on the canvas as this can result in colour leaching.
  • To clean use a soft brush and cold water.
  • Do not expose to petrol, oils or harsh chemicals.

Cleaning mould:

Your awning canvas is pre-treated with mould and mildew resistance, but if mould/mildew does occur please follow these steps:

  • Allow mould to dry.
  • Remove surface mould off with stiff bristle brush.
  • Vacuum the area.
  • Treat area with Oil of Clove spray (diluted spray can be purchased or can be mixed using a few drops of oil into a spray bottle of water).

Installing Your Bush Company Awning

A copy of the fitting instructions for The Bush Company awnings is available for download here

The Bush Company or one of our stockists can assemble install your awning, but if you choose to install the awning yourself please make sure that you have done the due-diligence on your intended install to ensure that it does not create any safety issues and ensure that you follow standard safety precautions when undertaking the install.

You may find it useful to watch the following videos:

Awning To Tent and Awning Bag Install

What If Your Vehicle Has A Spoiler On The Rear Door

We offer a range of shipping options including delivery to home addresses, businesses and freight depots.

If you have any questions regarding shipping,  please contact us by email at or by phone +1 (480) 508-1600.

Local Pickup

All items are available for collection from The Bush Company USA at Suite #5, 580n 54th Street, Chandler, Arizona, 85226, please contact us to place your order and confirm date of collection.  Please note that due to insurance and health and safety issues, you cannot self-fit your purchase on our premises.

Rooftop Tent Delivery

For delivery of rooftop tents to a residence or commercial business premises a forklift must be available at the delivery point and truck access, if this is not the case please contact us for a shipping quote to your nearest depot for collection.

Depot Collection

If you want to have you items delivery to a depot for you to collect (often the cheapest option for large items) please contact us by email at or by phone +1 (480) 508-1600 to obtain a shipping quote.

Damage In Transit

If you elect to have your items left in a safe place for home delivery, there is no opportunity for you to check that the item has arrived in good condition prior to accepting it, so The Bush Company USA cannot be held responsible for any claim for damage in transit or theft of items after delivery.

If you have elected to sign for your items (required for all tents and awnings) When the shipment arrives, it is essential that you check it thoroughly for any signs of damage before signing to accept the shipment.  This means checking the exterior box and if there are any signs of damage externally then the box should be opened, and the product examined for any signs of damage to the product itself.  This needs to be done before you sign anything to say that the item has been received, the driver needs to wait until you are satisfied.  If you are not satisfied with the condition of the item, then you are entitled to refuse delivery and the courier will have to return the product to us.

If you do not follow this procedure and it turns out that the item has been damaged in transit, then there is no way for us to claim on the freight insurance to cover any damage as you have signed to say that the product has been received in good condition.  Once you have signed for the delivery the courier company will interpret this as the item being delivered in good condition.  If you sign anything and are not satisfied you must ensure that this is noted by the driver in writing and obtain a copy that is signed by the driver.


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Product Inquiry